Filter By:
Crank Brothers

$7.99
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?

$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.

$10.00
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.

$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Candy 7 & 11
- Model years 2016 – present

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$19.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m10 includes:
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 124g
Warranty: Lifetime

$20.00
Crank Brothers' Sterling C02 Inflator makes quick work of getting you back in the saddle. We've all seen C02 inflators, but it's the details that set the Crank Brother's Sterling apart. Check out the frost guard on the canister and and the push-spring valve for easy air control. It comes complete with two 16g threaded cartridges.

$22.00
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
- enduro catridge bearings
- igus LL-glide bearings
- double seal system (internal and external seals)
- hex alloy end caps
- o-rings
- nuts
- sleeve bushings
- bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s

$27.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m17 includes:
Chain tool: 8/9/10 speed compatible
Spoke wrench: #0, 1, 2, 3
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Open wrench: 8mm, 10mm
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 168g
Warranty: Lifetime

$29.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25

$33.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime

$34.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- Magnetized storage case can be used as a handle for extra leverage
- 5-year warranty

$36.99
Crank Brothers Klic HP sports a revolutionary design that has a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out.
- High-pressure portable hand pump with hidden magnetic hose
- Premium pump with flexible rubber hose to allow for easy inflation.
- Features include a Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle.
- HP (high pressure) version recommended for tires 45c and narrower.
- All Klic pumps come with a bottle cage bracket mount.
- Length 220mm
- Pressure 120psi / 8.3bar
- Weight: 115 grams

$36.99
Crank Brother's Klic HV features a revolutionary design that sports a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out.
- High-volume portable hand pump with hidden magnetic hose
- Premium pump with flexible rubber hose to allow for easy inflation.
- Features include a Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle.
- HV (high volume) version recommended for tires 1.8” wide and larger.
- All Klic pumps come with a bottle cage bracket mount.
- Length: 220mm
- Pressure 110psi / 7.6bar
- Weight: 124 grams

$42.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- 8-12 speed chain tool is incorporated into the case
- Spoke wrench : #0, 1, 2 & 3
- Magnetized storage case can be used as a handle for extra leverage

$44.99 - $45.00
Crank Brothers' Sterling SG Pump features a tough aluminum barrel a little shy of 8 inches long for maximum pumping power; a switch to select high-volume (off-road tires) or high-pressure (road tires) inflation, and a handy built-in gauge. The universal head gets up to 100psi on either Schrader or Presta valves without having to switch the head.

$46.99
Crank Brothers Klic HP Gauge sports a revolutionary design with a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out.
- High-pressure portable hand pump with hidden magnetic hose and pressure gauge
- Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes!
- Features also include an air pressure gauge, Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle.
- HP (high pressure) version recommended for tires 45c and narrower.
- All Klic pumps come with a bottle cage bracket mount.
- Length 260mm
- Pressure 120psi / 8.3bar
- Weight: 142 grams

$46.99
Crank Brothers Klic HV Gauge features a revolutionary design that sports a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out.
- High-volume portable hand pump with hidden magnetic hose and pressure gauge
- Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes!
- Features also include an air pressure gauge, Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle.
- HV (high volume) version recommended for tires 1.8” wide and larger.
- All Klic pumps come with a bottle cage bracket mount.
- Pressure 110psi / 7.6bar
- Weight: 150 grams

$50.00
Crank Brothers' Sterling LG Pump features a tough aluminum barrel a little shy of 11 inches long for maximum pumping power; a switch to select high-volume (off-road tires) or high-pressure (road tires) inflation; and a handy built-in gauge. The universal head gets up to 100psi on either schrader or presta valves without having to switch the head.

$59.99 - $69.99
Crank Brothers steps up to the plate to provide downhillers, freeriders, and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050s have removable plates so you have full freedom to customize pin location for rider preference and terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 pedals are crafted from 6061-aluminum and utilize a bushing and cartridge bearing system that is completely user-serviceable.

$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years

$59.99
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip.
- Premium brass cleats with shims included
- Q-factor: 57mm
- Release angle: 15° / 20°
- Forged 435 Chromoly steel spindle
- 300 series stainless steel spring
- 5-year warranty
- 331g per pair

$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

$89.99 - $99.99
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
Spindle material: Forged scm 435 chromoly steel
Body material: 6061-T6 aluminum
Wing material: Stamped steel
Spring material: 300 series stainless steel
Release angle: 15° / 20°
Q-factor: 52mm
Inner bearing type: Igus LL-glide bearing
Outer bearing type: Enduro cartridge bearing
Cleat: Premium brass cleats with shims included
Weight: 355g per pair
Warranty: 5 years

$89.99
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: A380 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- cleat: premium brass cleats with shims included
- weight: 395g per pair

$89.99 - $94.99
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.

$99.99
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.

$99.99
Size-specific elite-level platform pedal provides optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU)
Specs:
- Spindle material: Forged SCM 435 chromoly steel
- Body material: 6061-T6 aluminum
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Footprint: 114mm x 111mm
- Adjustable pins: 10 per side
- Weight: 455g per pair
- Warranty: 5 years
Page 1 of 2
Next page