Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Brakes/Levers/Pads
$1.19 - $52.50
- Prime 2-piece rotors are for Prime Pro and Expert brakes only
- L-series, lightweight one piece rotors
- V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean
- Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound
- 205g @ 203mm
$1.91 - $42.00
- Hayes service parts for calipers
- Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
$1.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$4.99
Designed for your retro, oldie but goodie Road Bike Brake Calipers.
1 Pair
$6.00
Shimano Replacement pads for Mountain brake shoes
- Color: Black
- Intended Brake Type: Linear Pull
- Pad Attachment Style: Threaded Post
- Pad Type: Replacement Insert - Cartridge
- Rim Compatibility: Standard
- Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600
- M70R2: Severe condition brake pad, high performance in dry or wet conditions
$7.99
Shimano compatible road caliper brake pads from Bontrager.
Genuine replacement parts
Reliable Bontrager stopping power for optimal operation and safety.
- Sleek brake pads and cartridges are Shimano compatible
- British Standard Compound (BS)—Long wearing pad compound
- Exceeds all US standards for brake pads—Sticky rubber for improved braking
- Sold in pairs
$8.00 - $32.99
- T100 Sintered Metallic: long-life, all-condition compound
- T106 Semi Metallic: no-bed, shorter-life, quieter compound
- Set includes one pair of pads with retention clip
$8.99
Bontrager's high performance level replacement cartridge brake pads.
Genuine replacement parts
Reliable Bontrager stopping power for optimal operation and safety.
- British Standard Compound (BS)—Long wearing pad compound
- Exceeds all US standards for brake pads—Sticky rubber for improved braking
- Sold in pairs
$8.99
Standard linear pull brake pads for an economical replacement.
Genuine replacement parts
Reliable Bontrager stopping power for optimal operation and safety.
- Standard compound (STD)—All-around rubber pad compound
- Sold in pairs
$9.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$9.99
Miscellaneous replacement small parts for Hayes hydraulic disc brake systems.
- Includes piston and seal
$9.99
Shimano B05S Disc Brake Pads
- Includes 3 types of split pins
- Provides 50% more wear resistance than previous model (B03S)
- Compatible with Shimano models: BR-MT500, BR-MT400, BR-MT200, BR-MT375, BR-TX805, BR-UR300
- Stainless steel back plate
$10.30
The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow.
Features:
- Hardened and Plated reinforced steel backbone
- Patented Angled tip plow
- Water grooves
- Pad-Lock washer system
- Available in Threaded and 2024 Aluminum Smooth Post
Black: standard compound designed for dry condition riding
Red: semi-aggressive compound for good performance
Salmon: aggressive compound for extreme weather conditions
Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$10.99
Replacement levers for Trek kids' bikes.
Genuine replacement parts
Replace your worn or damaged brake levers for proper braking operation.
- Sized for smaller hands
- Two-finger lever operation
$11.50 - $15.50
- Extra-long molded pads for MTB linear brakes
- Black: standard compound designed for dry condition riding
- Salmon: aggressive compound for extreme weather conditions
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$11.99
- New resin pads have 50% more durability!
- Pair of G-Type disc brake pads without fins, for 1 caliper
- Resin compound, for improved modulation & lower noise
- Available with Steel backplate for lower cost or Aluminum backplate for superior heat management
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Interchangeable with F-Type and J-Type pads
- Includes spring and pin
- Disc Pad Material: Resin
- Pad Shape: Shimano G-Type/F-Type/J-Type
- Backplate: Steel
- Pad Spring: Included
- Cooling Fins: No
- Model Compatibility: BR-M8000
$12.99
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
- Qwik-Adjust Barrel Adjuster
- Bend Zone
- All weights per pair
- All levers are compatible with mechanical disc brakes and linear-pull brakes
$14.99
Standard linear pull cartridge brake pads for an economical replacement.
1 Pair
Black Cartridge
$14.99
Genuine replacement parts
Get back on the bike with fresh brake pads for optimal operation and safety.
Replacement brake pads for Zoom brakes used on specific Trek and Fisher mountain bikes.
- Replacement disc brake pads for Zoom HL-280 calipers
- HL-280 Zoom calipers came stock on Trek 3500 Disc, X-Caliber, and other models
$15.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$15.99
- New resin pads have 50% more durability!
- Pair of G-Type disc brake pads without fins, for 1 caliper
- Resin compound, for improved modulation & lower noise
- Available with Steel backplate for lower cost or Aluminum backplate for superior heat management
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Interchangeable with F-Type and J-Type pads
- Includes spring and pin
- Disc Pad Material: Resin
- Pad Shape: Shimano G-Type/F-Type/J-Type
- Backplate: Aluminum
- Pad Spring: Included
- Cooling Fins: No
- Model Compatibility: BR-M8000
$16.99 - $19.99
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel
$16.99
Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.
$17.00
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel
$17.99
Original equipment Lee Chi brakes.
Genuine replacement parts
Keep your bike safe and operating as it should.
- Dual pivot caliper brake
- Light quick-release mechanism
$18.25
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power.
- Qty 1 = enough for 1 wheel
$18.25 - $19.99
- High performance compounds recommended for all-conditions
- Steel backing
Page 1 of 5
Next page