Filter By:
- Parts & Accessories (11)
- Pedals (30)
- Show More Brands
- Show Fewer Brands
Pedals

$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.

$9.99
If your favorite ride leads to the beach or perhaps the grass at the local park, Electra's Barefoot Pedals are here. They feel the same way with their foot-friendly platforms and comfy plastic bodies. Treat your feet to smooth comfort with these durable platforms.

$9.99
Simple functionality: that's what Electra's Deluxe Block Pedals offer your favorite cruiser. With plenty of platform for your sneakers, the Deluxe Block Pedals are as comfortable as can be for your entire ride.

$10.00
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.

$10.00
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
- Includes 10 washers

$12.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Candy 7 & 11
- Model years 2016 – present

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$19.99
When you need extra tread so your feet stay planted, Electra's Chopper Pedals are up to the task. With a durable pedal body and sturdy, smooth-spinning spindles, the Chopper Pedals give you the confidence you need in traffic or even on the trails.
- Spindle: 9/16-inch

$19.99
Throw a leg over your downtown commuter and push confidently with Electra's City Alloy Pedals. The full aluminum body means these pedals are lightweight and durable, while the grip material ensures your foot stays planted on the platform in all conditions.

$22.00
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
- Fits VP and Look Keo pedals (pedals sold separately)

$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
-Enduro catridge bearings
- Igus LL-glide bearings
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings
- Nuts
- Sleeve bushings
- Bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s

$29.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.

$34.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance.
- Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
- Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts
- 9/16"

$49.99
MTB flat pedals with a durable nylon design and replaceable pins for consistent grip.
Confident and durable
Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance.
- Durable nylon body with a proven shape for comfort and confidence
- Durable axle spins on sealed cartridge bearings
- Replaceable steel traction pins
- Install with either 6mm hex or standard 15mm pedal wrench
- Spindle diameter: 9/16-inch

$49.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g

$55.00
Speedplay’s Walkable Cleat technology for Zero pedals sets a new standard for user-friendly, off-the-bike functionality. Speedplay’s Zero Aero Walkable Cleats are the first truly walkable cleats for road pedals. The integrated, rubberized covers stay on the cleats while you are riding. When walking, the covers improve traction and protect the cleats from wear. Additionally, the thin, contoured cleat profile allows for a more natural gait and makes walking in road shoes much less awkward.
- Grippy, rubberized tread covers the cleat for improved traction
- Durable cover material is resistant to wear and will not scuff floors
- Thin, contoured cleat profile makes walking easier and more fluid
- Zero Aero Walkable Cleats are streamlined to reduce drag and are compatible with all models of Zero Pedal Systems
- Fits all standard 3-Hole and 4-Hole shoes
- Replacement Zero Aero Walkable Cleat Covers and Cleat Buddies are available separately

$59.99 - $69.99
Crank Brothers steps up to the plate to provide downhillers, freeriders, and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050s have removable plates so you have full freedom to customize pin location for rider preference and terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 pedals are crafted from 6061-aluminum and utilize a bushing and cartridge bearing system that is completely user-serviceable.

$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years

$79.00
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency.
- Weight: 260g
- Body: Magnesium
- Spindle: CroMo
- Bearings: 2 Cartridge
- Bushings: 1 DU
- Pins: 28 Straight Pins per pair
- Size: 106x100x11 (mm)

$79.99
Get ready to ride
Take your riding to the next level with Bontrager Comp MTB pedals. A fully adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included.
- MTB pedals with dual sided SPD-compatible engagement
- Durable Chromoly spindle for long-lasting durability
- Sealed cartridge bearings provide smooth, reliable feel
- Adjustable release tension
- Includes cleats and mounting hardware
- Spindle: 9/16-inch

$89.99 - $99.99
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
Spindle material: Forged scm 435 chromoly steel
Body material: 6061-T6 aluminum
Wing material: Stamped steel
Spring material: 300 series stainless steel
Release angle: 15° / 20°
Q-factor: 52mm
Inner bearing type: Igus LL-glide bearing
Outer bearing type: Enduro cartridge bearing
Cleat: Premium brass cleats with shims included
Weight: 355g per pair
Warranty: 5 years

$89.99 - $94.99
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.

$119.99
The Shimano Deore XT Explorer Dual-Platform Pedals combine the efficiency of the SPD system and the convenience of a platform pedal, all in a lightweight package.
- One side SPD, one side platform
- Two-sided flexibility and performance
- Ideal for trekking
- Customize the entry and release tension settings
- 392 grams
- Concave cleat clearance on platform side
- High-grip pins
- Sealed cup and cone bearings

$120.00
- Large pedal platform
- Lower platform height for pedaling stability
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-moly spindle with 8 mm hex wrench mount
- Sealed mechanism
- SM-SH51 Cleat included
- 1.0 mm cleat spacer included
- Binding: Dual sided
- Cartridge axle
- Cleat retention adjuster
- Average weight: 342g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)

$120.00
- Wide pedal-to-shoe contact
- Lower platform height for pedaling stability
- Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-molly spindle with 8 mm hex wrench mount
- Sealed mechanism
- 1.0 mm cleat spacer included
- Binding Dual sided
- SM-SH51 Cleat included
- Cleat retention adjuster
- Integrated cage
- Cartridge axle
- Average weight: 438g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)

$125.00
Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles.
Details
- Hybrid pedal half flat / half clip-in
- 8 adjustable traction pins and textured finish for grip
- Wide 57mm q-factor for stability at speed
- Diamond plate pads for traction
- 2-sided entry / superior mud shedding
- Premium bearings & double seal system
Specs
- Adjustable pins: 8 per side
- Body material: A380 aluminum
- Cleats: Premium brass cleats with shims included
- Inner bearing type: Igus LL-glide bearing
- Max rider weight: No restriction
- Outer bearing type: Enduro cartridge bearing
- Q-factor: 57mm
- Release angle: 15° / 20°
- Spindle material: Forged scm 435 chromoly steel
- Spring material: 300 series stainless steel
- Warranty: 5 years
- Weight: 403g per pair
- Wing material: Cast stainless steel

$130.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel.
Specs:
Spindle material: Forged SCM 435 chromoly steel
Body material: Cast stainless steel
Wing material: 17-4PH stainless
Spring material: 300 series stainless steel
Release angle: 15° / 20°
Q-factor: 52mm
Inner bearing type: Igus LL-glide bearing
Outer bearing type: Enduro cartridge bearing
Cleat: Premium brass cleats with shims included
Weight: 280g per pair
Warranty: 5 years
Page 1 of 2
Next page